Body, face, paws and nails, on one handle.
Most of what a groomer charges for between full grooms is ten minutes of fiddly work: the hair over the eyes, the mat starting behind an ear, the fur growing between paw pads.
Taxes calculated at checkout
Why you'll love it
A full size clipper is the wrong tool for paw pads, the face and around the eyes, which is exactly where the hair causes problems. The narrow detail head is what lets you do those areas at home instead of booking a groomer for ten minutes of work.
Steel blades heat up under sustained use and a hot blade is the usual reason a dog starts objecting halfway through. Pairing a ceramic cutter with a steel comb keeps the working temperature down over a longer session.
Clipper blades die from packed hair and skin oil, not from cutting. Being able to hold the whole head under a tap rather than picking it out with a brush is what keeps it cutting cleanly into a second year.
Good fit if
Look elsewhere if
The reason a multi head kit beats a single clipper is not versatility for its own sake. It is that the areas causing actual problems on a dog are small and awkward, and a full width blade is the wrong shape for all of them. Hair falling into the eyes, fur matting between paw pads and overgrown sanitary areas are the three things owners book appointments for, and none of them wants a body clipper.
| Head | What it is for |
|---|---|
| Body clipper | Full coat work with a guide comb fitted |
| Trimmer | Uneven patches, long fur, tidying up after the clipper |
| Detail | Faces, around the eyes, between paw pads |
| Nail grinder | Shaping and smoothing rather than cutting |
A dog that starts fidgeting twenty minutes into a groom is usually not bored. Steel blades warm up under sustained running, and a hot blade against skin is uncomfortable well before it is dangerous. Owners read the reaction as impatience and push on, which teaches the dog that grooming becomes unpleasant if it goes on long enough.
Pairing a ceramic cutter against a steel comb keeps the working temperature lower for longer, because ceramic sheds heat rather than storing it. It does not make the problem disappear on a long session, so the habit worth building is checking the blade against the back of your hand every few minutes. If it is warm to you, it is warm to them.
Clipper blades rarely go blunt in a home setting. They stop cutting because hair, dander and skin oil pack into the gap between cutter and comb, and a blade in that state drags rather than slices, which pulls at the coat and hurts. Most people never get on top of it because picking it out with a brush does not reach the packed layer.
An IPX7 rating means the head goes under a running tap and the residue washes out. That single difference is most of what decides whether a clipper is still cutting cleanly in its second year, and it costs nothing in effort once it becomes routine.
Under 55 decibels puts this among the quieter pet clippers, which is why it is worth trying on a cat at all. Cats hear higher frequencies than we do and object to the pitch as much as the volume, so a rating that reads as quiet on paper is not a guarantee of anything. Start with the motor running on the far side of the room and go no faster than the cat allows.
In the box
How it works
Shop by pet or category to find exactly what your cat or dog needs, no wading through thousands of listings.
Check out securely with card, PayPal or one tap Apple Pay & Google Pay. Free delivery over £45.
Fast, tracked dispatch straight to your door, and a happier pet before you know it.
The details
Rinse the head after each use and let it dry fully. Oil the blade lightly every few sessions, run it for a moment to spread the oil, and wipe the excess so it does not collect hair. Store the heads separately rather than loose in a drawer, because a chipped ceramic cutter is a replaced cutter.
Loved by real pet parents
Body clipper for his back, the narrow detail head for his face, then the nail grinder without getting up off the floor. The whole grooming session is one tool and one charge now.
The clipper and the detail head are both excellent. The grinder works but it is slower than a dedicated one, so I do two paws a night rather than all four in a sitting. Still glad it is on there rather than in another drawer.
Being able to hold the whole head under running water rather than picking hair out of it with a brush is the part I did not expect to care about. Shook it off, left it on the windowsill, back together by morning.
Under 55 decibels is not silent, but it sits well below the clippers I used to own, and she stays on the table while I do the mats behind her ears. That was never happening before.
It handles the face, the paws and a light tidy well enough. For a whole body clip on a thick coat the motor slows and it takes far longer than I had budgeted for, so he still goes out twice a year. Good for what it actually is.
The fringe hanging over her eyes was the reason I bought it in the first place. The narrow head takes a few millimetres off without anything wide going near her face, and she does not flinch at it.
Six combs and the numbers moulded into the plastic are almost impossible to make out in normal light, so I put a dab of nail varnish on the two I use. The blades themselves stay cool over twenty minutes, which is the important part.
My old clipper got warm enough that I had to stop and let it sit, and he would have lost patience by then. The ceramic cutter stays noticeably cooler through a session and he stays put on the table.
Running a lead across the kitchen while trying to hold a wriggling dog was half the problem before. The battery has never run out part way through a session in six months of use.
Good questions
The grinder here is one of four heads on a shared body, so it is the right buy if you want the coat and the nails on one tool. If nails are all you do, the standalone grinder has a longer run time and a shape that is easier to hold at the angle nails need.
For maintenance trimming, yes. For a full strip on a heavily coated breed it will work but slowly, and you will want to go in stages. A dog that mats badly every season is better served by the grooming vacuum kit, which has a stronger motor.
The heads and the blade assembly, yes, that is what IPX7 covers. Dry it before it goes back on the body and never rinse it while it is on charge.
Under 55dB it is one of the quieter clippers, which helps, but cats vary enormously. Start with the motor running in the room without touching them and see where you get.
For most people, yes, if you are buying one thing. The standalone grinder has longer run time and a shape that holds the angle nails want, which matters if nails are a weekly job on a large dog. As a fourth head on a kit you already own, this is plenty for routine maintenance.
Different problems. That one exists to catch shed coat during a full body clip and has the motor for heavy work. This is the precision tool for small awkward areas. Owners of heavy shedders frequently keep both and reach for this one far more often.
Very short, close to the skin. Fit a guide comb for any body work. The bare blade is for detail areas where you are working deliberately and slowly, not for running down a dog's back.
Last reviewed 31 August 2026